Bass - HX Stomp SVT v5
Bass - HX Stomp SVT v5
Version v5 released 2023-08-15. Requires firmware 3.5 or later.
Designed by an LA session bass player, Blake Riley, and me. In order to dial in version 1.0 of this preset, we compared it to a Noble preamp and were successful in nailing that sound. What we have now with the parallel SVT amp models is dramatically better than what is possible with a single Noble and pedals.
This is a package that comes with 2 presets: the main one with the amp and a few effects, and a second with effects you can copy/paste into the main preset. You will need to unzip the archive file to access the two presets.
Main preset footswitches:
Amp drive
RAT
Octave
The effects preset comes with several blocks. Feel free to copy them into the main preset if you’d like to experiment with some different effects. Please note the recommended locations for each block.
Triangle Fuzz (muff) - before amp on path 1
Ballistic Fuzz - before amp on path 1
Timmy - before amp on path 1
Chorus - after merge block
The preset is meant to be used with a passive bass. If you have an active bass you will need to lower the level on the compressor block so that the amp block is not getting hit so hard.
Experiment with the HX Stomp input level set to instrument or line level, whichever works better for your setup. If you have your own compressor, octave, or other pedals, you may wish to disable/delete similar blocks in the main amp preset to free up DSP for other blocks from the FX preset in this bundle. If you have drive pedals I recommend putting them in the fx loop, and placing the fx loop block before the amp on path 1 in order to keep the low end clean.
Additional audio demos on the Helix SVT bass preset page.