Version 3.0 released 2020-06-23. Requires firmware 2.92. Please make sure your HX Edit and hardware unit are both fully updated before importing, or you will get an error informing you that the preset “contains unrecognized models.”

This is a package with two presets: one with a compressor, amps, cabs, and an EQ, and the other with some extra effects from the Helix version of this preset. You will need to unzip the zip file that downloads as it contains two presets. Once you have unzipped the zip file, you can import both presets onto your unit and then copy and paste the effects into the “amps” preset based on the other pedals you’re using with the Stomp. For example, if you have all your own drive pedals and a compressor, you’d leave those blocks out, but maybe copy in a couple of the delays.

Footswitch 1 toggles the amp drive up and down.

Footswitch 2 toggles some settings for humbuckers and single coils. LED off is for humbuckers, LED on is for single coils.

Please read the HX Stomp notes on the main HX Stomp page for recommended settings, placement, usage, etc.